Foreword For Your Safety Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This TT685F camera flash applies to Fuji series cameras and is This product contains high-voltage electronic parts. Touching compatible with TTL autoflash.
Contents Foreword Compatible Camera Models For Your Safety Name of Parts Body Control Panel LCD Panel What's in the Box of TT685F? Separately Sold Accessories Attaching to a Camera Power Management Flash Mode: TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Second-Curtain Sync Flash Mode –...
(4) Radio Transmission Shooting Attaching to a Camera ● Master Unit : Radio transmission Flash mode Attach the Camera Flash. wireless shooting : Group flash (radio transmission) ● Slip the camera flash’s mounting foot into the camera’s hotshoe all the way.
High-Speed Sync Flash Mode: TTL Autoflash High Speed Sync (Hss flash) enables the flash to synchronize with all camera shutter speeds. This is convenient when you want to use This flash has three flash modes: TTL, Manual (M), and Multi aperture priority for fill-flash portraits.
Flash Mode -- M: Manual Flash Flash Mode -- Multi:Stroboscopic Flash The flash output is adjustable from 1/1 full power to 1/128th power With stroboscopic flash, a rapid series of flashes is fired. It can be in 1/3rd stop increments. To obtain a correct flash exposure, use a used to capture a multiple images of a moving subject in a single hand-held flash meter to determine the required flash output.
IDs to prevent signal interference. The channel IDs of the as a master unit. master unit and the slave unit(s) must be set to the same. As a slave unit, TT685F is compatible with Godox X1 series transmitter e.g. X1T-C(For Canon), X1T-N(For Nikon), X1T-S(For Press Function Button 3 Sony), X1T-F(For Fuji), X1T-O(For Olympus or Panasonic).
Page 9
Slave Unit Setting Using Fully Automatic Wireless Flash ● Set the other camera The FEC and other settings that set on the master unit will also be flash as the wireless slave appeared on the slave unit automatically. The slave unit does not unit.
Positioning and Operation Range (Example of wireless flash Other Applications shooting) ● Autoflash Shooting with One Slave Unit Wireless Control Function The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power level of the flash and the flash triggering.
Bounce Flash ZOOM: Setting the Flash Coverage and Using By pointing the flash head toward a wall or ceiling, the flash will the Wide Panel bounce off the surface before illuminating the subject. This can The flash coverage can be set automatically or manually. It can be soften shadows behind the subject for a more natural-looking shot.
C.Fn: Setting Custom Functions Protection Function The following table lists the available and unavailable custom 1. Over-Temperature Protection functions of this flash. To avoid overheating and deteriorating the flash head, do not fire ● more than 30 continuous flashes in fast succession at 1/1 full C.Fn Custom Functions power.
Technical Data Troubleshooting If there is a problem, refer to this Troubleshooting Guide. Model TT685F • Type The Camera Flash cannot be charged. Compatible Cameras Fuji cameras (refer to compatible camera models) ● The battery is installed in the wrong direction. Guide No.
FCC Warning Maintenance Any Changes or modifications not expressly approved by the party ● Shut down the device immediately should abnormal operation be responsible for compliance could void the user’s authority to operate detected. the equipment. This device complies with part 15 of the FCC Rules. ●...