Setting the flash mode to
<M>
Setting <M> Flash Mode
You can directly operate the Receiver unit to manually set the manual flash or
stroboscopic flash.
1. Setting the Receiver unit.
2. Setting flash mode to <M>
Press <MODE> button so that <M> is displayed.
•
Set the manual flash output.
•
Multi: Wireless Flash Shooting with Manual Flash
Setting flash output.
Press Function
•
Button
1/2/3/4<M/A/B/C>.
Turn the Select Dial
to set the flash
output of the
groups. Press Set
Button to confirm.
23
Taking the picture.
Each group fires at
•
the set flash ratio.