Other Applications - Godox TT685II-S User Manual

1. Setting <MULTI> Stroboscopic flash
Press <MODE> button so that <MULTI> is displayed.
•
Setting the stroboscopic flash.
•
The Reason & Solution of Not Triggering in Godox 2.4G Wireless
1. Disturbed by the 2.4G signal in outer environment (e.g. wireless base
station, 2.4G wifi router, Bluetooth, etc.)
To adjust the channel CH setting on the flash trigger (add 10+ channels) and use
•
the channel which is not disturbed. Or turn off the other 2.4G equipment in
working.
2. Please make sure that whether the flash has finished its recycle or caught
up with the continuous shooting speed or not (the flash ready indicator is
lighten) and the flash is not under the state of over-heat protection or other
abnormal situation.
Please downgrade the flash power output. If the flash is in TTL mode, please try
•
to change it to M mode (a preflash is needed in TTL mode).
3. Whether the distance between the flash trigger and the flash is too close or
not (<0.5m)
Please turn on the "close distance wireless mode" on the flash trigger
•
X2 & X1 series: press the test button and hold on, then turning it on until the flash
•
ready indicator blinks for 2 times.
XPro series: Set the C.Fn-DIST to 0-30m.
•
4. Whether the flash trigger and the receiver end equipment are in the low
battery states or not.
Please replace the battery (the flash trigger is recommended to use 1.5V
•
disposable alkaline battery).

Other Applications

Sync Triggering
The Sync Cord Jack is a Φ2.5mm plug. Insert a trigger plug here and the flash will be fired
synchronously with the camera shutter.
Auto Focus Assist Beam
In poorly-lit or low contrast shooting environments, the built-in auto focus assist beam
will automatically light on to make it easier for autofocus. The beam will light up only
when autofocus is difficult and get out as soon as the autofocus becomes correct.
If you want to turn off the auto focus assist beam, set the "AF" to "OFF" on the C.Fn
settings.
If you find the auto focus assist beam does not light up, this is because the
•
camera has got a correct autofocus.
24