Protection Function
Over-Temperature Protection
To avoid overheating and deteriorating the flash head, do not fire more than 40
•
continuous flashes in fast succession 1/1 full power. After 40 continuous flashes,
allow a rest time of at least 10 minutes.
If you fire more than 40 continuous flashes and the fire more flashes in short
•
intervals, the inner over-temperature protection function may be activated. If this
occurs, allow a rest time of about 10 minutes, and the flash unit will then return
to normal.
When the over-temperature protection is started
•
Number of flashes that will activate over-temperature protection:
Power Output Level / Number of Flashes / ZOOM (mm)
is shown on the LCD display.
29