Canon imageRUNNER ADVANCE DX 6870i Service Manual page 105

Canon
Table 54 – Copy Card Reader-F1 Specifications
Available Cards
Card Readout Method
Magnetic Card Reading
Direction
Store/Replay
Power Source
Dimensions
(W x L x H)
Weight
Table 55 – Super G3 Fax Board-AX1 Specifications
Note: Specifications remain the same even when the Super G3 2nd Line Fax
Board-AX1 or Super G3 3rd/4th Line Fax Board-AX1 is installed.
Telephone Line Used
Scan Line Density
(Scan Transmission)
Transmission Speed
Compression Method
Transmission Type
Sending Original Sizes
Receiving Paper Sizes
Number of Memory RX
Jobs
Transmission Times
imageRUNNER ADVANCE DX 6800 Series Service Guide
Revision 9
imageRUNNER ADVANCE DX 6800 Series Service Guide
Item
Magnetic
Magnetic readout
Insertion Direction
Replay
From the main unit
3 1/2" x 3 13/16" x 1 5/8" (88 x 96 x 40 mm)
(excluding the attachment kit and cable)
Approximately 7.1 oz (200 g)
(including the attachment kit and cable)
Item
Public Switched Telephone Network
(When using an IP telephone service, facsimile communication may not
be performed normally via an IP telephone line. It is recommended to
use facsimile communication via a general telephone (Public Switched
Telephone Network) line.)
Normal: 8 pels (Picture elements (pixels).)/mm x 3.85 line/mm
Fine: 8 pels/mm x 7.7 line/mm
Super-Fine: 8 pels/mm x 15.4 line/mm
Ultra-Fine: 16 pels/mm x 15.4 line/mm
Super G3: 33.6 kbps
G3: 14.4 kbps
MH, MR, MMR, and JBIG
Super G3 and G3
11" x 17", LGL, LTR, LTRR and STMTR
11" x 17", LGL, LTR, LTRR and STMTR
Up to 320 jobs
JBIG: Approximately 2.6 seconds (When sending LTR original paper,
Normal 8 pels x 3.85 line/mm ECM (JBIG))
Specifications
Specifications
March 2023
Page 97