Web Server Settings; Snmp Settings; Other Settings - DEVA Broadcast DB90-RX Instruction Manual

Ip audio decoder

Hide thumbs Also See for DB90-RX:

Table of Contents

Web Server Settings

• Port – sets the TCP port of the WEB Server. Default value is 80.

• Username – sets the preferred user name to be used. The Default value is user.

• Password – allows the password to be customized. The Default value is pass.

NOTE:

DB90-RX provides you with a protected access to the device settings. Options to setup

username only, password only and both are available. If the username and password fields are left

blank, protected access option will be disabled.

Specify Agent ID, Agent Port, Read/Write Communities, Manager IP and Manager Port.

Agent – enables/disables SNMP Agent.

Agent ID – is used for identification of the device among others, when an SNMP notification is

being sent.

Press the [Download] button to download the latest available DB90-RX SNMP MIB file.

NOTE:

The MIB file may vary from one firmware revision to another. Downloading this file

from the device, guarantees that you have the proper MIB file.

Name – Name of the device. This name is used to identify the device in local network and is

used as title on all web pages. Up to 63 alpha-numeric characters can be entered.

NOTE:

In order the applied settings to be used press the [Save] button. Please have in mind

that some settings may reset the DB90-RX.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

- 24 -

Table of Contents