Db90-Tx Streaming Audio Server Set-Up - DEVA Broadcast DB90-TX Setup Instructions

How can the db90-tx be set to act as a streaming audio server, sending audio to db90-rx decoder/s used as an ip audio client

Hide thumbs Also See for DB90-TX:

DB90-TX STREAMING AUDIO SERVER SET-UP

1. Go to Configuration> IP Audio;

2. Choose the preferred audio signal input;

3. Assign Encoder + Sample rate and the desired Signal Quality. The combination of these

parameters will define the required minimum bandwidth of your network connection;

4. Then in Stream Settings section – specify the Port to be used and the Maximum supported

connections;

5. Preferably change the Name of the stream to identify you server easily;

6. Press [Save] to save the applied changes.

For detailed information and instructions on how communication with the DB90-TX can be

established, please refer to

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

"Appendix A - DB90-TX Quick User Guide" on page

- 6 -

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

Table of Contents

Db90-rx