Operation - DEVA Broadcast DB90-RX Instruction Manual

Ip audio decoder
Table of Contents

Advertisement

DB90-RX is controlled through the built-in web server and a standard web browser can be used
to monitor its status or make some adjustments. To connect to the device you need to know its IP
address and follow the next steps:
• Open a WEB Browser.
• Enter the device IP address in the browser's address field.
• Press <ENTER>.
If you do not know the device's IP address, you can hear it through the headphones when you
turn on the device. The other option to find out the IP address is using UPnP discovery in local
networks
(see "UPnP discovery in Local Networks" on page
The web interface consists of the following pages:
• Status
• Configuration
- Network
- IP Audio
- Backup Audio
• Factory Defaults
• Reboot
• Firmware Update
The Navigational menu and its options are available at the top part of the WEB Interface. The
settings window below is divided into two sections - settings (on the left) and help section with
brief explanation of the settings. Pointing the mouse cursor on any of the fields in the left part of
the screen will open a new window with additional and useful information.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

Operation

- 19 -
Tel: +359 56 820027, Fax: +359 56 836700
33).

Advertisement

Table of Contents
loading

Table of Contents