Table of Contents
Advertisement
Chapter 1: Introduction
1.3 System Features
The following table is an overview of the main features of the 2029U-T Series server.
System Features
Motherboard
X11DPU
Chassis
SC219U2AC4-R1K02-T
CPU
Dual Intel Xeon 82xx/62xx/52xx/42xx/32xx or 81xx/61xx/51xx/41xx/31xx processors (in Socket P (LGA3647))
(Intel Xeon Processor Scalable Family). For the latest CPU/memory updates, refer to our website at
http://www.supermicro.com/products/motherboard/Xeon/C620/X11DPU.cfm.
Memory
Twenty-four slots for up to 6 TB of 3DS Load Reduced DIMM (3DS LRDIMM), 3DS Registered DIMM (3DS
RDIMM), or up to 3 TB of Load Reduced DIMM (LRDIMM) with speeds of up to 2933 MHz; support for Non-
Volatile DIMM (NVDIMM) and Intel Optane DC Persistent Memory (DCPMM)
Chipset
Intel C621
Expansion Slots
Two full-height, double-width, PCI-E slots, four full-height, full-width PCI-E slots, one low-profile PCI-E slot, one
internal low-profile PCI-E slot (Ultra riser); Note: 2029U-TR4T model is different—see Ch 3
Storage Drives
Twenty-four hot-swap 2.5" bays for fourteen SATA3 drives, or an option for twenty SAS3 plus four NVMe/SAS3
Two rear hot-swap 2.5" SATA/SAS3
(Optional) M.2: Up to two PCI-E M.2 or one SATA3 M.2
Power
1000 W redundant 80Plus Titanium level modules
Cooling
Four 8-cm heavy duty fans, two CPU heatsinks, two air shrouds to direct air flow
Input/Output
USB 3.0: Two ports on the rear I/O panel (USB 0/1)
One serial port; one VGA port
LAN ports
Two or four, depending on the Utra riser card model; see previous page for details
One dedicated IPMI port
Form Factor
2U rackmount; (WxHxD) 17.2 x 3.5 x 28.5 in. (437 x 89 x 723 mm)
9
Advertisement
Table of Contents
