Supermicro SuperServer 2029U-T Series User Manual page 98

SuperServer 2029U-T Series User's Manual
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy
support if there are no legacy USB devices present. Select Disable to have all USB devices
available for EFI applications only. The options are Enabled, Disabled, and Auto.
XHCI Hand-off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The options are Enabled and Disabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which will provide complete legacy
USB keyboard support for the operating systems that do not support legacy USB devices.
The options are Disabled and Enabled.
Server ME Configuration
This feature displays the following system ME configuration settings.
•
Operational Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
PCH SATA Configuration
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel® PCH chip
The options are Disable and Enable.
Configure SATA as
Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID
to configure a SATA drive specified by the user as a RAID drive. The options are AHCI and
RAID.
SATA HDD Unlock
Select Enable to unlock the HDD password. The options are Disable and Enable.
98
.