Pci Expansion Cards - Supermicro SuperServer 2029U-T Series User Manual

PCI Expansion Cards

Riser cards on chassis brackets allow you to add PCI expansion cards. The total number
of expansion cards depends on the model in the 2029U-T Series. All expansion cards are
PCI-Express 3.0. For all models:
•
RSC-R2UW-4E8 supports four standard size PCI-E x8 expansion cards (5-8).
•
RSC-R1UW-E8R supports one low-profile x8 expansion card (4)
Additional expansion card capability depends on which Ultra riser card is installed in your
model (see the table below). For details on installing GPUs, see Appendix F.
1
Figure 3-15. PCI Expansion Card Chassis Slots
Slot Mechanical
1 Double-width, full-height, full-length
2 Double-width, full-height, full-length
3 Internal low-profile, half-length
4 Low-profile, half-length
5 Full-height, full-length
6 Full-height, full-length
7 Full-height, full-length
8 Full-height, full-length
Full-height = 4.2", Low-profile = 2.5" Full-length = 10.5", Half-length = 6.6"
* This slot supports only Supermicro SAS Cards listed below.
Part Number
AOC-S3008L-L8e
(8-port HBA)
AOC-S3008L-L8i
(8-port SW RAID)
AOC-S3108L-H8iR
(8-port HW RAID)
AOC-S3108L-H8iR-16DD
(8-port HW RAID)
Chapter 3: Maintenance and Component Installation
2
3
Expansion Card Configurations
Electrical
x16 (CPU1)
x16 (CPU1)
x8 (CPU1)
NA
x8 (CPU1)
x8 (CPU2)
x8 (CPU2)
x8 (CPU2)
x8 (CPU2)
x8 (CPU2)
Supermicro SAS Cards
Description
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3,
122HDD, HBA
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3,
63HDD, RAID 0, 1, 1E
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3,
240HDD, RAID 0, 1, 5, 6, 10, 50, 60
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3,
16HDD,
RAID 0, 1, 5, 6, 10, 50, 60
55
5
6
4 7
8
In Models
All models
TR4T
All other models
TR4T
All other models
All models
All models
All models
All models
All models