Nailing Brackets - FireplaceXtrordinair 564 GSR2 25K CF Installation Manual

Finalizing the Installation

Nailing Brackets

The fireplace has nailing brackets on both sides. Once in place, secure the fireplace to the framing.
NOTE: Make sure the fireplace is square and plumb when securing the fireplace.
SPECIAL NOTE WHEN USING "SUBMERGED FACING" OPTION
Most installations use the "Standard Facing" position for the nailing brackets. When using the
"Submerged Facing" option, the fireplace is positioned ½" to the rear. Make sure to accommodate
this dimension when configuring framing and determining the vent position, gas line position, etc.
Bend the nailing brackets out
and secure to the side framing.
Additional nailing brackets are provided
along the base of the fireplace. Use these
brackets if not using the front brackets.
Standard Facing
- Drywall contacts side of fireplace
- Extended on Framing Dimensions
a
Submerged Facing
- Drywall butts against non-combustible facing
- Flush on Framing Dimensions
a
© Travis Industries
b
c
b
Rotate the bracket on the
rivet 180 degrees.
5/8/2019 - 1505
(for qualified installers only)
Fireplace
WARNING:
Do not install combustible
material (drywall) in front of
the fireplace.
Fireplace
Non-Combustible Facing
15
1/2" (13mm) Drywall
1/2" (13mm) Drywall
564 GSR2 25K CF