Summary of Contents for ELTA FANS Multiflow SMC Series
Page 1
Multiflow SMC Installation and Maintenance Instructions THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION Code Supply FL Amps Output kW r/min SMC315/4-5-2 230V/1Ph/50Hz 1.09 0.12 1300 SMC315/2-5-2 230V/1Ph/50Hz 2.55 0.37 2750 SMC400/4-5-2 230V/1Ph/50Hz 1.51 0.18 1300 SMC400/2-3-2 230V/1Ph/50Hz 6.15 2750 SMC450/4-5-2 230V/1Ph/50Hz...
Page 2
Upon receipt, the fan equipment should be visually inspected to check for any damage. Ensure that the impeller is free to rotate. If there are any queries concerning the fan equipment, Elta Fans Ltd should be contacted prior to the installation.
Page 3
Precaution must be taken to locate the exhaust discharge terminal so as to avoid the backflow of gases into the room from the open flue of gas or other fuel burning appliances. START-UP Before power is supplied to the unit, check that the wiring is correct as per the fan connection diagram.
Page 5
GUARANTEE Elta Fans Ltd will, free of charge, within a period of 1 year from the date of despatch from their works, repair or at its option replace any goods which are proved to have defects as a result of defective materials or workmanship.
This manual is also suitable for:
Multiflow smc315/4-5-2Multiflow smc315/2-5-2Multiflow smc400/4-5-2Multiflow smc400/2-3-2Multiflow smc450/4-5-2Multiflow smc500/4-5-2...
Show all
Need help?
Do you have a question about the Multiflow SMC Series and is the answer not in the manual?
Questions and answers