Table of Contents
Advertisement
4.8
Monitor menu
This menu displays the system temperature, fan speed, and power status. You can also
change the fan settings in this menu.
Fan Speed Control [Auto Mode]
Allows you to select the power-on state for the NumLock.
Configuration options: [ Auto Mode] [Full Speed Mode] [Manual Speed Mode]
The following item appears only when you set the Fan Speed Control to [Manual Speed
Mode].
REAR_FAN1 / CPU_FAN1 / FRNT_FAN1-4 Duty [50]
Allows you to set the desired POST Report waiting time from 1 to 10 seconds. Use the
<+> or <-> to adjust the value. The values range from 10 to 100.
P11C-C/4L
4-37
Advertisement
Table of Contents
Need help?
Do you have a question about the P11C-C/4L and is the answer not in the manual?
Questions and answers