Asus P11C-C/4L User Manual page 87

PEG Port Configuration
PEG 0:1:0
Max Link Speed [Auto]
Allows you to set the Max Link Speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
Max Link Width [Auto]
Allows you to set the Max Link Width.
Configuration options: [Auto] [Force X1] [Force X2] [Force X4] [Force X8]
Power Down Unused Lanes [Auto]
Allows you to power down unused lanes on the max possible link width.
Configuration options: [Auto] [Enabled]
Gen3 Eq Phase 2 [Auto]
Allows you to perform Gen Equalization Phase 2.
Configuration options: [Auto] [Enabled] [Disabled]
Gen3 Eq Phase 3 Method [Auto]
Allows you to select the Gen3 Eq Phase 3 Method.
Configuration options: [ Auto] [Adaptive Hardware Equalization] [Adaptive Software
ASPM [Auto]
Control ASPM support for PEG 0.
Configuration options: [Auto] [Disabled] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
De-emphasis Control [-3.5 dB]
Allows you to configure the De-emphasis Control.
Configuration options: [-6 dB][-3.5 dB]
OBFF [Enabled]
Allows you to enable or disable OBFF.
Configuration options: [Disabled] [Enabled]
LTR [Enabled]
Allows you to enable or disable LTR.
Configuration options: [Disabled] [Enabled]
PEG0 Slot Power Limit Value [75]
Set the upper limit on power supplied by slot. Use the <+> or <-> to adjust the value.
The values range from 0 to 255.
PEG0 Slot Power Limit Scale [1.0x]
Allows you to select the scale for the Slot Power Limit Value.
Configuration options: [1.0x] [0.1x] [0.01x] [0.001x]
PEG0 Physical Slot Number [1]
Allows you to set the physical slot number attached to this Port. The number has to be
globally unique within the chassis. Use the <+> or <-> to adjust the value. The values
range from 0 to 8191.
P11C-C/4L
Equalization] [Static Equalization] [Disabled]
4-27