Table of Contents
Advertisement
6.
SATA DOM power setting (3-pin DOM1_PWR1, DOM1_PWR2)
This jumper allows you to configure the DOM power setting.
•
•
7.
Smart Ride Through (SmaRT) setting (3-pin SMART_PSU1)
This jumper allows you to enable or disable the Smart Ride Through (SmaRT) function.
This feature is disabled by default. Set to pins 1-2 to enable it. When enabled, SmaRT
allows uninterrupted operation of the system during an AC loss event.
This jumper functions only when you install the ASUS ASMB9 management card.
2-22
DOM1_PWR1 corresponds to the SATA5 connector.
DOM1_PWR2 corresponds to the SATA6 connector.
Chapter 2: Hardware Information
Advertisement
Table of Contents
Need help?
Do you have a question about the P11C-C/4L and is the answer not in the manual?
Questions and answers