Following LED´s are used on the Xc2002™
(4)
(5)
(3)
Reference
Name
1
Power:
Power OK indicator.
2
Alarm:
Flashing: Active, non-
acknowledged alarm(s) present.
Steady: Active, acknowledged
alarm(s) present.
3
Remote:
Indicates if unit is in Remote mode.
4
Load:
Indicates if the compressor is loaded.
5
Run:
Indicates if running feedback is
present.
XC2002™ MENU OVERVIEW
At Xc2002™, the LCD will show the following
information through the display views:
1. in Normal condition (scroll through the
information using UP and DOWN):
(1)
- Controller type & version
(2)
This view shows the controller type and the
software version number.
- Fuel level
This view shows the fuel level (in %) and the
running hours.
- 37 -
- Engine RPM
This view shows the engine running speed (in
RPM) and the running hours.
- Fuel consumption
This view shows the engine fuel consumption and
the running hours.
See also "Parameter list" on page 39 for selection
between metric (L/h) or imperial (Gal/h) units.
- Alarm list
- contains a list of active alarms
This view shows the number of active alarms and
gives access to them.
An overview is given in "Alarm Display (pop up
window)" on page 42.