Dryer Use; Starting Your Dryer - Kenmore 8945 Series Use & Care Manual

WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
Getting started
1. Press Power button.
2. Load your Dryer loosely – DO NOT overload.
3. Close the door.
4. Select the appropriate cycle and options for the load.
5. Press the Start/Pause button.
6. The Dryer indicator light will illuminate.
7. The estimated cycle time will appear in the display. The time
may fluctuate to better indicate drying time remaining in the
cycle.
NOTES:
■ When the cycle is completed, the Door Lock light will go out
and "End" will appear in the display.
■ Pressing Power cancels the cycle and stops your Dryer.
■ The Drying, Cooling, and Wrinkle Guard indicator lights will
illuminate during those portions of the cycle.
WARNING:
Do not place anything on top of your dryer while it
is running.
CA-KENMORE-DRYER_DC68-02866D_EN_140613.indd 17

DRYER USE

Starting Your Dryer

No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it
(including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death or
fire.
WARNING:
To reduce the risk of fire, electric shock, or injury
to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Place laundry in dryer and shut door.
3. To select a cycle, rotate the Cycle Selector dial to the desired
cycle. The indicator light by the cycle name will illuminate.
The Normal, Heavy Duty, Perm Press and Delicates cycles
are Sensor Dry cycles. Sensor Dry automatically senses
the moisture in the load and shuts the dryer off when the
selected dryness level (very dry to damp dry) is reached.
Under Sensor Dry, the estimated time remaining will vary
depending on the following variables:
- Type of fabric being dried.(i.e., towels, light cottons)
- Mixed loads
- Wetness of the load being dried
- Selected Dryness Level(i.e., More Dry, Normal Dry, Less Dry)
WARNING
Fire Hazard
17
2014-06-13 10:54:01