Table of Contents
Advertisement
Chapter 4
1 ) Press the WPS button on the back panel of the access point.
2 ) Within 2 minutes, enable WPS on your client. The client will connect to the access
point.
4 3
Check Advanced Wireless Settings (for Access
Point/Multi-SSID Mode)
You can check advanced wireless settings for the device. It is recommended that you
keep the default settings. Improper settings may affect network performance.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to
Wireless
>
Wireless
3. Check the advanced settings of your wireless network.
• WMM
– This function can guarantee the packets with high-priority messages being
transmitted preferentially.
• AP Isolation
– This function isolates all connected wireless stations so that wireless
stations cannot access each other through WLAN.
• Airtime Fairness
– This function can improve the overall network performance by
sacrificing a little bit of network time on your slow devices.
WLAN
On
TP-Link
MyHome
David
HomeNetwork
TP-Link_Home
TP-Link_Router
Test
Advanced.
Wireless Settings
29
Advertisement
Table of Contents
