Table of Contents
Advertisement
Chapter 1
The following parts (view from left to right) are located on the back panel.
Ports or Buttons
Power Port
On/Off Button
Reset
WPS
Ethernet Port
Antennas
For connecting the access point to a power socket via the provided
power adapter.
Press this button to power on or off the access point.
Press and hold this button until the Power LED blinks to reset the
access point to its factory default settings.
Press this button and immediately press the WPS button on another
device to quickly establish a wireless connection.
For connecting an Ethernet enabled device, such as a router or
desktop.
Used for wireless operation and data transmitting. Upright them for
the best Wi-Fi performance.
Get to Know About Your Access Point
Description
6
Advertisement
Table of Contents
