Chapter 2
5. Click
Change Mode
6. Wait until the access point reboots, then log in again.
7. Follow the step-by-step instructions to complete the configuration.
8. Relocate the access point about
dead zone.
Tip: To maximize the signal strength, refer to the
9. Now, connect your devices to the access point wirelessly or via an Ethernet cable,
and enjoy the internet!
2 2 3
Client Mode
In this mode, the access point connects your wired device to a wireless network. This
mode is suitable when you have a wired device with an Ethernet port and no wireless
capability, for example, a smart TV or game console and you want to connect it to the
internet wirelessly.
in the upper right corner and switch to the
halfway
FAQ
section.
Router
Set Up Internet Connection
Range Extender
between your host router and the Wi-Fi
Access Point
Halfway
mode.
Devices
11