TP-Link TL-WA1201 Quick Installation Manual

Quick Installation Guide
Wireless Gigabit Access Point
TL-WA1201
Configure the Access Point
Access Point Mode (Default)
Internet
Existing Router
1. Connect the access point according to Step A to D in the diagram.
2. Turn on the power, and wait until the Wireless LEDs (
3. Use the default SSID and Password printed on the label of the access point to
join its Wi-Fi network.
Note: You can surf the internet now. For your wireless network security, it is recommended to change the default SSID
(network name) and the password of your Wi-Fi network. To do so, perform the following steps.
Range Extender Mode
Internet
1. Connect the access point according to Step A and B in the diagram.
2. Turn on the power, and wait until the Wireless LEDs (
3. Use the default SSID and Password printed on the label of the access point to
join its Wi-Fi network.
4. Launch a web browser and enter http://tplinkap.net. Create a password to log in.
5. Go to Quick Setup, select Range Extender mode and click Next. Follow the
step-by-step instructions to complete the configuration.
• Halfway is the best way.
Generally, the ideal location for a repeater is about halfway between your wireless router and your
wireless clients and make sure that the location you choose is within the range of the host router. If
that is not possible, place it closer to your wireless router to ensure stable performance.
• Less obstacles ensure better performance.
Choose a location with less obstacles around that may block the signal between the access point and
the host network. An open corridor or a spacious location is ideal.
• Less interference provides more stability.
Choose a location away from Bluetooth devices and other household electronics, such as cordless
phones, microwaves, and baby monitors to minimize signal interference.
Transforms your existing wired network to a wireless one.
B
) are lit and stable.
Extends the range of an existing Wi-Fi network.
Host AP's SSID
) are lit and stable.
Tips for Optimal Wireless Signal
Before your start
Which mode do you need? Refer to the table to choose a proper mode.
Scenario
You want to transform your wired (Ethernet) network to a
wireless one.
You are in a Wi-Fi dead-zone or a place with weak wireless
signal. You want to have a larger effective range of the
wireless signal throughout your home or office.
You have a wired device with an Ethernet port and no wireless
capability, for example, a Smart TV, Media Player, or game
console. You want to connect it to the internet wirelessly.
You want to connect your devices to different wireless
networks and become isolated by VLANs.
D C A
4. Launch a web browser and enter http://tplinkap.net. Create a password to log in.
5. Go to Quick Setup, select Access Point mode and click Next. Follow the
step-by-step instructions to complete the configuration.
6. Now, reconnect your wireless devices to the new Wi-Fi network.
Enjoy!
B A
6. Relocate the access point to a suitable place. For details, refer to the tips below.
7. Now, connect your devices to the access point wirelessly or via an Ethernet
cable.
Enjoy!
Operation Mode
Access Point Mode
(Default Mode)
Range Extender Mode
Client Mode
Multi-SSID Mode
TL-WA1201's SSID
TL-WA1201's SSID
TV
OR
Router
Halfway
Other
OR Wired
Device
Devices