Wireless Advanced Settings - TP-Link Auranet EAP115-Wall User Manual

WPA-PSK

Based on pre-shared key, security mode WPA-PSK is characterized by high security and
simple configuration, which suits for common households and small business. WPA-PSK
has two versions: WPA-PSK and WPA2-PSK.
Version:
Encryption:
Wireless
Password:
Group Key
Update Period:

5.1.3 Wireless Advanced Settings

Figure 5-7 Security Mode_WPA-PSK
Auto: Select WPA-PSK or WPA2-PSK automatically based on the

wireless station's capability and request.
WPA-PSK: Pre-shared key of WPA-PSK.

WPA2-PSK: Pre-shared key of WPA2-PSK.

Select the encryption type, including Auto, TKIP, and AES. The default
setting is Auto, which can select TKIP (Temporal Key Integrity Protocol) or
AES (Advanced Encryption Standard) automatically based on the wireless
station's capability and request. AES is more secure than TKIP and TKIP
is not supported in 802.11n mode. It is recommended to select AES as
the encryption type.
Configure the WPA-PSK/WPA2-PSK password with ASCII or Hexadecimal
characters. For ASCII, the length should be between 8 and 63 characters
with combination of numbers, letters (case-sensitive) and common
punctuations. For Hexadecimal, the length should be 64 characters (case-
insensitive, 0-9, a-f, A-F).
Specify the group key update period in seconds. The value can be either
0 or 30-8640000 seconds.
Figure 5-8 Wireless Advanced Settings
13