Table of Contents
Advertisement
Chapter 4
3. Click SAVE.
•
To change the transmit power:
1. Go to
Wireless
>
Wireless
2. Click
2.4GHz
or
5
GHz.
3. Select an option from the
•
To change channel settings:
1. Go to
Wireless
>
Wireless
2. Click
2.4GHz
or
5
GHz.
3. Select a
Channel Width
just leave it as default.
4. Select an operating
the channel to
Auto
issue.
5. Click SAVE.
•
To change the transmission mode:
1. Go to
Wireless
>
Wireless
2. Click
2.4GHz
or
5
GHz.
3. Select a transmission
recommended to just leave it as default.
4. Click SAVE.
4 2
Use WPS for Wireless Connection (for Access
Point/Multi-SSID Mode)
Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to
Wireless
> WPS.
3. Follow one of the following methods to connect your WPS-enabled client to the
access point's Wi-Fi network.
• Connect via the client's PIN
1 ) Click
Client's
PIN.
Settings.
Transmit Power
Settings.
(bandwidth) for the wireless network. It is recommended to
Channel
for the wireless network. It is recommended to leave
if you are not experiencing the intermittent wireless connection
Settings.
Mode
according to your wireless client devices. It is
drop-down list.
Wireless Settings
27
Advertisement
Table of Contents
