Table of Contents
Advertisement
Chapter 2
Internet
Existing Router
B
1. Connect the access point according to Step A to D in the diagram.
2. Turn on the power, and wait for about 2 minutes until the Power and Wi-Fi LEDs are lit
and stable.
3. Use the default SSID and Password printed on the label of the access point to join its
Wi-Fi network.
4. Launch a web browser and enter http://tplinkap.net. Create a password to log in.
Note:
If the login window does not appear, please refer to the
5. Click
Change Mode
6. Wait until the access point reboots, then reconnect to the access point and log in
again.
7. Follow the step-by-step instructions to complete the configuration.
8. Now, connect your wireless devices to the Wi-Fi networks and enjoy the internet!
Tip:
If you want to isolate different networks, go to
set different VLAN IDs.
D
FAQ
in the upper right corner and switch to the
Wireless
>
Wireless
Set Up Internet Connection
SSID 1 for VLAN 1
SSID 2 for VLAN 2
SSID 3 for VLAN 3
Access Point
SSID 4 for VLAN 4
C
A
section.
Settings, click the edit icon of each SSID entry and
VLAN 1
VLAN 2
VLAN 3
VLAN 4
Multi-SSID
mode.
13
Advertisement
Table of Contents
