Assembly; Installing The Handle - Fieldmann FZR 2028 E Manual

EN 10

Assembly

5. ASSEMBLY
For the purpose of transportation, the lawnmower is supplied disassembled.
Before use, it must be assembled according to the following steps:

5.1 INSTALLING THE HANDLE

Fig. 2.1
Insert both parts of the bottom handle in the mower chassis and secure them with screws (1), see fig. 2. 1 .
Attach the top handle part using screws with the quick coupler, see fig. 2.2. The thorx design allows you to set
the handle height.
Attach the main switch onto the mower's top handle, see fig. 2.3.
Secure the main switch cable in the handle using the attached clips (1), see fig. 2.4.
Fig. 2.2 Fig. 2.3 Fig. 2.4
FZR 2028 E