Table of Contents
Advertisement
Adjusting the pressure
This is accomplished by turning the handwheel.
The default setting is maximum pressure.
To shut down the pump:
1. Switch off the machine
2. Cut off the water supply
3. Open the spray gun briefly until the pressure is released
4. Apply the safety catch on the spray gun
5. Remove the water hose and high pressure hose
6. Drain the pump: switch on the motor for approx. 20 seconds
7. Winter: store the pump in rooms above 0° C
8. Clean the water filter
Preparation for use
Preparation for use
Preparation for use
Preparation for use
Preparation for use
11
Advertisement
Table of Contents
