Environmental Specifications - Omron STC-MBS881POE Product Specifications And User's Manual

Environmental Specifications

5.4
Model Number
Operational Minimum
Temperature /
Humidity
Maximum
Storage Temperature / Humidity
Vibration
Shock
Standard Compliancy
RoHS
(*1) Please insure the camera is installed with the appropriate heat dissipation. If camera has a mounted lens and a tripod
with an aluminum plate, this could decrease the camera housing temperature for heat dissipation. When the internal
temperature sensor on the camera shows less than 75 deg. C, the camera housing temperature (top plate) will be less than
63 deg. C.
Taking these steps will maintain the heat rating of the electronic components of the camera.
Upper side of camera
Measuring point
STC-MBS881POE / STC-MCS881POE
Product Specifications and User's Guide
STC-MBS881POE
Environmental Temperature: 0 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
Environmental Temperature: +40 deg. C or
Camera housing temperature (top plate) shall not exceed +63 deg. C (*1)
Environmental Humidity: 0 to 85 %RH (No condensation)
Environmental Temperature: -20 to +70 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions, 30 min. each
Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions, 3 times each
EMS: EN61000-6-2, EMI: EN55011
STC-MCS881POE
RoHS Compliance
No.19S208-00
15/73