Operation Steps - Dawlance DWT 1470 PL User Manual

Before washing, the digital timer
shows preset time. The unit displayed is HOUR.
If AIR DRY is selected, the digital timer
displays air dry time. The unit displayed is MIN.
When washing, the digital timer shows
the rest time of washing. The unit displayed is MIN.
When trouble is encountered, the digital time
shows trouble code.
At the start of the program, if the machine is in
FUZZY logic, the digital timer shows -- .
Normal Wool
Heavy Child
Soft Foam Clean
Eco Wash Tub Clean
Fast Air Dry
Additional
Function
Water
Program Start/
Preset/
Level Pause
Air Dry
You can select one program from NORMAL, HEAVY, SOFT, ECO WASH, FAST, WOOL, CHILD,
FOAM CLEAN,TUB CLEAN and AIR DRY.
If you choose "ECO WASH" program, then the wash time is "9 minutes", rinse time is "2", and spin time is
"5 minutes". You can cancel one of the processes (but if you choose "SOAK", the wash time cannot
be cancelled).
If you choose "FAST" program, then the wash time is "9 minutes", rinse time is "1", and spin time is "3 minutes".
You can cancel one of the processes (but if you choose "SOAK", the wash time cannot be cancelled).
At the start of the program, the process is NORMAL.
At the start of the program, press this button to select preset time from 2-24 hours.
If you want to cancel the preset time, press POWER to put the washing machine in waiting state.
If you need to select air dry, please press "PROGRAM" button to select air dry, then press this
button to set air dry time.
Fuzzy logic is present in Normal and Heavy cycles. When you select these cycles, it will take water level and set time
as per the load. However, you may also select water level manually.
At the start of the program, press WATER LEVEL to select the water level. At this time, the fuzzy logic function is not available.
You can select appropriate water level according to the quantity of your laundry. 1-2 is low water level, 3-6 is
middle water level, and 7-10 is high water level.
During wash or rinse cycle, if you want to add extra water then you have two options:
- Pause program, reselect water level and start machine.
- Press water level button for a few seconds during operation and the machine will continue to take water till the
button is pressed. After you release this button, the machine will start its operation.
Automatically add water: During SOAK, WASH and RINSE processes, if the water level is lower than the setting
water level, the washing machine will pause and will automatically add water to the setting water level.
Operation
After selecting the program, process and water level, press
this button to start.
Press this button to pause the working and press again
to continue.
To control the washing machine in
working or waiting state.
Power
11

Operation steps

Power Button
Press this button once to operate. Press it again to turn the power off.
Start/Pause Button
Use to pause and restart the operation. To change the washing procedure during an operation,
press this button to stop, and again to restart after changing the procedure.
Program Select Button
Each time the button is pressed, the washing programme changes.
Remaining Time, Delay Start Time, Error
Display
Displays the remaining wash time, reserved delay start time, and the error state
if a problem occurs in the washing machine so that you can take action.
Delay Start Time Button
Adjusts delay start time. Max. 24 h.
Water Level Button
The water level is automatically adjusted. However, you can select the water level manually by
pressing this button. The water level button is only active during standby status. The water
level can be selected before the machine starts to run. If you want to change it while the machine
is running, then press START/PAUSE, change the level and press START/PAUSE again.
Displays selected programme's default water level. Low 1 to 10.
Function Button
With every press of this button, the function changes.
Operation
12