Dawlance DW 6100 W Manual

Single Tub Washing Machine
User Manual
DW 6100 W

HOW TO USE

BEFORE YOU CALL FOR SERVICE

There may be times when your suspend washing machine requires maintenance. Before calling
for service please check the following points. You may be pleasantly surprised that an apparent
malfunction can be easily recti ed as follows.
POSSIBLE CAUSE
Washer does not start 1. Washer may not be plugged
in or connection may be loose.
2. House fuse blown or circuit
breaker tripped.
3. Wash timer is not set.
Rattling and clanking noise 1. Foreign objects such as coins or
safety pins may be in the tub.
2. Belt buckets and metal fasteners are
hitting the washer tub during the washing
cycle.
Vibrating noise 1. Washer is not levelled and levelling
legs screws may not be securely
tightened.
2. Clothes not evenly distributed in tub.
3. Washer may not be installed on a
solid, rm oor.
Thumping sound 1. Heavy wash loads may produce a
thumping sound at the beginning.
HOW TO FIX IT
1. Make sure the plug is tightly
pushed into wall outlet.
2. Electrical line is overloaded. Do
not run other appliances when
washer is in use.
3. Electrical lines may be inadequate.
Contact an electrician.
4. Inappropriate house fuse or circuit
breaker is being used. Use only a
15 Amp, time delay fuse or circuit breaker.
5. Set the wash timer.
1. Stop machine and check the tub.
2. Call your authorized service agency.
3. To prevent unnecessary noise and
damage to the tub, fasten fasteners and
turn garments inside out.
1. Relevel washer by adjusting levelling
legs, screw must be tightened.
2. Stop washer and redistribute clothes.
3. Additional oor bracing may be
needed. Contact carpenter to correct
sagging or slopping oor.
1. This is normal.
2. If sound continues stop machine,
redistribute clothes.
01