Do you have a question about the DWT 1166 X ADS+ and is the answer not in the manual?
Questions and answers
Rehmat Ullah
May 18, 2025
My machine is not working, buttons are working but the machine is not functioning.
1 comments:
Mr. Anderson
May 23, 2025
If the buttons on the Dawlance DWT 1166 X ADS+ are working but the machine is not functioning, possible issues could include:
1. The child lock function is activated, which locks all buttons including POWER. This would prevent the machine from starting even if buttons respond. 2. The power supply may have been cut off automatically if the program did not start within 10 minutes after pressing the power button. 3. The top lid may be open. If the lid is not closed within 5 seconds after opening, the machine will alarm and stop functioning. 4. A fault may have occurred. In this case, the digital timer may show a trouble code. If the issue persists, unplug the machine and contact the seller.
Do not attempt to repair the machine yourself.
This answer is automatically generated
Muhammad Jahanzaib Khan
April 13, 2025
We re using DWT1166 AdS plus washing machine. We have stuck Powder detergent in detergent box. While we put water in it. It still not Coming out. Please guide us. What can we do for cleaning that Box.
Plus Machine needs to clean as whole.
As its 3months have completed. Please guide us how to clean.
1 comments:
Mr. Anderson
April 13, 2025
To clean the detergent box of the Dawlance DWT 1166 X ADS+ washing machine with stuck powder detergent, dissolve the detergent first in warm water (about 30°C) and whisk it to make a solution before pouring it into the machine. This helps prevent detergent residue from sticking.
After three months of use, clean the exterior with a soft cloth and avoid using volatile chemicals to prevent damage. Also, clean the magic filter by pulling it out, opening it, and removing any trapped lint or debris. Clean the water inlet filter if it's blocked by dust. Unplug the machine and turn off the water tap when not in use.
Contents Before using Parts name....................1 Cautions..................... 2 Installation and adjustment................ 4 How to use drainpipe................. 5 Water inlet installation................6 Operation Preparation before operation..............8 Load laundry..................Use of detergent..................9 Control panel instructions................. 10 Operation steps..................12 Maintenance.................... 13 Troubleshooting..................
Parts name Before using Cautions Before using Before using Top lid Please insert the plug into the power socket with voltage rating Always unplug the appliance and turn off the water when 220V A/C. Control panel the power is cut, the machine is moving, getting cleaned, Water box lid or it is not in use.
Installation and adjustment Before using Cautions Before using Before using Please install and adjust the machine according to the requirements of the manual. It is very important for your safety and correct operation. Unpacking Do not put your hands inside while the machine is working. It is dangerous to alter the speci cations or It is dangerous even if the speed is very slow.
How to use drainpipe Water inlet installation Before using Before using Install drainpipe Tap selection Set drainpipe clip into the drainpipe to above 2-3cm (from the drainpipe end without pothook). Now, install the drainpipe into the right drainpipe connector and x the drainpipe and the drainpipe connector with the clip.
Preparation before Water inlet installation Before using operation Operation Connect the inlet hose with the washing machine 1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before Preparation before washing each use. If it is, contact the seller immediately. Inlet hose nut 2.
Control panel instruction Load laundry Operation Operation Mode and meaning of the indicator light The capacity of washing and spinning of the machine refers The indicator light is always on, indicating that it is not selected. to the largest weight of the standard laundry under dry The indicator is flashing, indicating that it has been selected.
Control panel instruction Operation steps Operation Operation Operation steps Before washing, the digital timer shows preset time, unit is HOUR. 1. Put through the power, press POWER SWITCH button, the machine enters into initial condition. If select AIR DRY, the digital timer displays air dry time, unit is MIN. Displays 1-10 levels when selecting water level.
Troubleshooting Settlement Maintenance Operation Maintenance methods Before contacting the technicians, please make the following checks: External cleaning After the end of the programme Clean the exterior cabinet of the appliance with a The machine stops automatically, and music soft cloth. Do not use cleanser or volatile chemical the buzzer will remind you to take out the Possible reason Phenomena...
Page 10
Other functions Settlement 1. Give an alarm Display Explanation Settlement The top lid is opened Settlement Close the top lid and clear up the alarm. when preset is started. Open top lid, according to before After draining for 7 minutes, troubleshooting and settlement to it still does not reach to Insert the plug tightly.
Other functions 4. Child lock function (1) If you set child lock function, all the buttons will be locked including POWER. If the top lid is opened while the washing machine is working, the washing will be stopped and the machine will give an alarm.
Need help?
Do you have a question about the DWT 1166 X ADS+ and is the answer not in the manual?
Questions and answers
My machine is not working, buttons are working but the machine is not functioning.
If the buttons on the Dawlance DWT 1166 X ADS+ are working but the machine is not functioning, possible issues could include:
1. The child lock function is activated, which locks all buttons including POWER. This would prevent the machine from starting even if buttons respond.
2. The power supply may have been cut off automatically if the program did not start within 10 minutes after pressing the power button.
3. The top lid may be open. If the lid is not closed within 5 seconds after opening, the machine will alarm and stop functioning.
4. A fault may have occurred. In this case, the digital timer may show a trouble code. If the issue persists, unplug the machine and contact the seller.
Do not attempt to repair the machine yourself.
This answer is automatically generated
We re using DWT1166 AdS plus washing machine. We have stuck Powder detergent in detergent box. While we put water in it. It still not Coming out. Please guide us. What can we do for cleaning that Box. Plus Machine needs to clean as whole. As its 3months have completed. Please guide us how to clean.
To clean the detergent box of the Dawlance DWT 1166 X ADS+ washing machine with stuck powder detergent, dissolve the detergent first in warm water (about 30°C) and whisk it to make a solution before pouring it into the machine. This helps prevent detergent residue from sticking.
After three months of use, clean the exterior with a soft cloth and avoid using volatile chemicals to prevent damage. Also, clean the magic filter by pulling it out, opening it, and removing any trapped lint or debris. Clean the water inlet filter if it's blocked by dust. Unplug the machine and turn off the water tap when not in use.
This answer is automatically generated