Operation Steps - Dawlance DWT 260 C LVS+ User Manual

Before washing, the digital timer
shows preset time, unit is HOUR.
If select AIR DRY, the digital timer
displays air dry time, unit is MIN.
When washing, the digital timer shows
the rest time of washing, unit is MIN.
When trouble encountered, the digital time
shows trouble code.
At the beginning of start, if with FUZZY logic,
the digital timer shows -- .
Normal Wool
Heavy Child
Soft Foam Clean
Energy Saver Tub Clean
Fast Air Dry
Additional
Function
Water
Program Start/
Present/
Level
Pause
Air Dry
Can select one program from NORMAL, HEAVY, SOFT, ENERGY SAVER, FAST, WOOL, CHILD,
FOAM CLEAN,TUB CLEAN and AIR DRY.
If choose "ENERGY SAVER" program, the wash time is "9 minutes", spin times is "2", spin time is
"5 minutes", you can cancel one of the process (but if you choose "SOAK", the wash time cannot
be cancel).
If choose "FAST" program, the wash time is "9 minutes", spin times is "1", spin time is "3 minutes",
you can cancel one of the process (but if you choose "SOAK", the wash time cannot be cancel).
At the beginning of start, the process is NORMAL.
At the beginning of start, press this button to select preset time from 2-24 hours.
If want to cancel preset time, press POWER to make the washing machine in waiting state.
If need to select air dry, please press "PROGRAM" button to select airy dry, then press this
button to set air dry time.
At the beginning of start, if with FUZZY logic and do not select water level, the digital timer shows - - . At
this time, before press START/PAUSE. If select NORMAL or HEAVY, with fuzzy logic. When select
ENERGY SAVER, no fuzzy logic, the water level is 7. When select FAST, no fuzzy logic, water level is
2 . If no WASH process, no fuzzy logic.
At the beginning of start, press WATER LE VEL to select water level, at this time, no fuzzy logic function,
you can select appropriate water level. According to your laundries quantity. 1-2 is low water level, 3-6 is
middle water level, 7 -10 is high water level.
During wash (including rinse), if need to add water, press WATER LEVEL button to add water, un-press
will stop adding or PAUSE the washing machine and press WATER LEVEL to select higher water level,
then press START/PAUSE button. The washing machine will add the water to setting level automatically and
continue working. If your resetting water level is lower than present water level, the lower
water level will valid in next water inlet.
Automatically add water: during SOAK, WASH and RINSE process, if the washing machine check the water
level is lower than setting water level, The washing machine will pause and add water to setting water level
automatically.
Operation
After select program, process and water level, press
this button to start.
Press this button to pause during working, press again
will rework.
To control the washing machine is in
working state or waiting state.
Power
11

Operation steps

Operation steps
1. Put through the power, press POWER SWITCH button, the machine enters into initial condition
a. If there is no water in the tub, the machine is in the condition of FUZZY, indicator light of WASH is 15,
RINSE is 2, SPIN is 7; water level is under setting, preset displays, "__" program is NORMAL.
If press START/PAUSE (press "PROGRAM" and select "HEAVY", the washing machine is in state of
"FUZZY"), the machine will detect the laundry quantity and set the water level automatically.
b. If there is water in the tub, the machine is in the condition of NON FUZZY, indicator light of WASH is 15,
RINSE is 2, SPIN is 7; indicator light of water level is 7, program is NORMAL, LED displays the program
time. You can press WASH, RINSE, SPIN, for process to set different wash time , rinse times, spin times
and soak time.
2. At the beginning of start, you can press "SPIN" to set spin process only, press
"SPIN" again to set spin time.
3. Sele ct appropriate water level according to your laundries quantity.
4. At the beginning of start, if need to select LOW NOISE, WATER RECYCLE, pressing
WATE R LE VE L button and press PR ES ET /AIR DRY button, each time press PRESET/
AIR DRY button, circularly select LOW NOISE and WATER RECYCLE. Only you select
RI NSE and SPIN, you can select WATER RECYCLE.
5. At the beginning of start, if need to select preset, please press PR ES ET /AIR DRY button
and select appropriate preset time, the preset time is shown in the digital timer, and the
time indicates the time to nish the whole washing. If want to cancel PR ES ET, please
press POWE R to make the washing machine in waiting state.
6. At the beginning of start, if need to select air-dry, press PROGRAM button and select
AIR DRY program, press PRESET/AIR DRY can select the time of AIR DRY. When the air
dry function is over, the washing machine will be in waiting state.
7. Close the top lid, press START/PAUSE, the washing machine is working. During working,
press WATE R LE VE L and PR ES ET /AIR DRY button, child lock function will start, press
again, unlock this function. If open the top lid, washing machine stop working and give an
alarm.
8. When the washing is nished, buzzer alarm, power supply cut off automatically.
Operation
12