Table of Contents
Advertisement
Load laundry
The capacity of washing and spinning of the machine refers
to the largest weight of the standard laundry under dry
conditions. Washing quantity shall be lower than the rated
capacity.
Different thickness, size and type of the laundry will
in uence the actual washing capacity. It is suitable that
the laundry can be turned around normally during washing.
Do not select high water level when the laundry is less.
Use of detergent
Withdraw the dispenser box before adding the detergent.
Pour concentrated synthetic washing powder into
Detergent box
How to use bleach
Fill water to the selected level.
Dilute the bleach in the container
and pour it slowly into the washing
tub.
Do not use bleach for colored or
gured laundries as they are prone
to lose colors.
Do not put bleach in the laundry
directly.
Refer to the manual for the usage
and quantity of the bleach.
Please dissolve powdered bleach
before use.
It is suggested to use low foam washing powder.
For the quantity of the concentrated washing powder, please refer to its manual.
Remarks: Avoid splashing of water and wastage of washing powder. Water level should not be too
high, if the laundry is less.
Operation
the box directly as shown in the left illustration.
For the dosage of washing powder, please refer
below.
It is suggested to use low sud washing powder.
How to use the washing powder
Dissolve in the machine directly (not suitable for
preset program)
1. It is suitable for low water level.
2. Add the washing powder and run the machine for
30 seconds to dissolve it completely.
3. Put the laundry in and select suitable water level.
For instant dissolving of the washing powder
1. Prepare warm water about 30
o
C in a container.
2. Pour the powder while stirring to fully dissolve it.
The washing powder is more prone to pollute the
laundry than the detergent, therefore, please use
it in proper quantity.
Washing powder with poor quality or not used for a
long period may get blocked. Please clean the
detergent box frequently.
09
Control panel instructions
Mode and meaning of the indicator light
On: Indicates the selected mode.
Flashing: Indicates the program is running.
Additional functions
At the start of the program, press WATER LEVEL and PRESET at the same time. This will give you an
option to either select WATER RECYCLE, LOW NOISE, or LOW NOISE-WATER RECYCLE.
If LOW NOISE is selected, then the program's default setting will be NORMAL and the PROGRAM
button will get locked.
If only RINSE and SPIN are selected, then WATER RECYCLE preset can be chosen.
To set CHILD LOCK press WATER LEVEL and PRESET while the machine is working. To unlock, press
the same buttons again.
With DIY program, you can set rinse time.
At the start of the program, the rinse time setting is "2 times".
With DIY program, you can choose soak function and wash time.
Press "WASH" button for 2 seconds to choose soak function and press for
2 seconds again to cancel soak function.
Under "NORMAL"and "HEAVY" programs, you can choose soak function. The soak is
before wash.
At the start of the program, the wash time is "15 minutes".
At the start of the program
Put power supply through and press "POWER" button. Now the washing machine is at the start of the program:
1. If there is no water in the inner tub, the washing machine is in "FUZZY" condition. At this point, the washing time is
"15 minutes", rinse time is "2 times", spin time is "7 minutes", water level and preset are displayed "--" and the program
is "NORMAL
"(or press "PROGRAM" to select "HEAVY).
will automatically sense the weight of laundry. It will also set the water level and will adjust the time accordingly.
2. If there is water in the inner tub, the washing machine is not in "FUZZY" condition. At this point, the washing time is
"15 minutes", rinse time is "2 times", spin time is "7 minutes", water level is "7", program is "NORMAL
digital time displays the time to nish washing.
Soak (min.)
9
20
4
7
15
3
5
12
2
3
9
1
Spin (min.)
Wash
Rinse
Spin
With DIY program, you can set the spin time.
At the start of the program, the spin time setting
is "7 minutes".
At the start of the program, you can press "SPIN"
to set spin process only and press "SPIN" again to
set spin time.
If "START/PAUSE" button is pressed, the washing machine
10
",
and
Advertisement
Table of Contents
