Simpson SWT7055LMWA User Manual page 9

Proportion of Hot and Cold water based on temperature selection.
Temp. Descriptions
for normally soiled white cottons and linen
Very hot
(e.g. teacloths, towels, tablecloths, sheets...).
for normally soiled, colourfast garments (e.g.
shirts, night dresses, pyjamas....) in linen,
Hot
cotton or synthetic fibres and for lightly
soiled white cotton (e.g.underwear).
for delicate items (e.g. net curtains), mixed
Warm
laundry including synthetic fibres and
woollens bearing the label pure new wool,
Cold
machine washable, non-shrink.
IMPORTANT: Components in the washing machine are designed to be used
with water no hotter than 70°C. If your water supply is too hot, you should
have a temperature limiting valve fitted by a qualified plumber.
Flood diagnostic is explained on page 27. You should refer to this if you
have water pouring onto the floorThe display will show "
hear rapid short beep continuously to remind you about this problem.
3.3 WATER LEVEL BUTTON
Choose the water level by pressing Water Level button. Use only the amount of
water you need for the wash load.
CHOOSE THE WATER LEVEL
Appropriate Clothes Load (kg)
Water
Model
Level
SWT6055TMWA
Full
4 to 6.0
High
3 to 4.5
Medium
1.5 to 3
Low
0 to 1.5
1) Model SWT6055TMWA Maximum mass of dry cloth is 6.0 kg.
2) Model SWT6555TMWA Maximum mass of dry cloth is 6.5 kg.
3) Model SWT7055LMWA Maximum mass of dry cloth is 7.0 kg.
4) Model SWT7055TMWA Maximum mass of dry cloth is 7.0 kg.
1. Choose the water level by pressing
Water Level button.
Model
SWT6555TMWA
SWT7055LMWA
You can select:
SWT7055TMWA
Full, High , Medium and Low
5 to 7
2. Use only the amount of water you
need for the wash load.
3 to 5
1.5 to 3
0 to 1.5
Water from Water from
HOT valve COLD valve
100 % 0 %
65 % 35 %
50 % 50 %
10 % 90 %
" and you will
9