Simpson SWT7055LMWA User Manual page 19

5.7 STARTING A PROGRAM
To start a program, press the
Start/Pause button, a default
program duration will be displayed
on the screen.
NOTE
When you select the Drain+Spin
program, there will be a delay of
at least 2 minutes before the
washing machine starts to spin.
This delay is a pump out (Drain)
period to ensure the bowl is
empty of water, which is neces-
sary before spin commences.
Even though you may have only
put wet clothes into an empty
bowl, the delay before spin will
still occur to be safe and to
protect your washing machine.
5.8 CHANGING A PROGRAM
You can turn the Program Selector
Knob to a new program position at
any time. If you do move the
Program Selector Knob the effect
will be different depending on the
status of the machine at the time
you do this, as follows:
When the machine is running,
moving the Knob to a new
position will result in the machine
continuing the wash and the
display will show "
flashing with 3 consecutive short
beeps to remind you that this
option is not allowed.
5.9
5.10
" and
INTERRUPTION OF A
PROGRAM
If you have started your wash and
you wish to stop it for some reason,
press the Start/Pause button to
enter PAUSE mode. Time digits and
colon LEDs blink.
Press the Start/Pause again. The
program will continue.
AT THE END OF THE
PROGRAM
-
The appliance stops automati-
cally.
-
The display will show "
-
Turn the Program Selector knob
to the position "Off".
-
Remove the laundry from the
appliance. Make sure that the
washing tub is empty.
- Keep the lid ajar, to prevent the
mildew and odours.
- Turn off the water tap.
19
"