Displaying Energy Values Of The Charging Process - Siemens SICHARGE UC Operating Instructions Manual

8.7.6

Displaying energy values of the charging process

The SICHARGE UC Dispenser has an energy meter. The energy meter provides you with basic
information on the current charging process.
Requirements
• You have opened the Options menu.
• You have pressed the "Energy Meter" button in the Options menu.
"Energy Meter" menu
The touch screen displays the following information for the current charging process in the
"Energy Meter" menu:
Figure 8-14 "Energy Meter" menu
Value
Start Date
Initial SoC
End Date
Final SoC
Energy Delivered
Alarm Code
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE
Description
Specifies the start date and time of the charging process.
Indicates the initial state of charge (SoC) of the vehicle battery.
Indicates the end date and time of charging.
Displays the final state of charge (SoC) of the vehicle battery.
Indicates the amount of energy transferred to the electric vehicle during charging.
The charging station displays the following alarm codes:
• Value "0": The SICHARGE UC Dispenser has completed the charging process
without errors.
• Values "1" to "43": The SICHARGE UC Dispenser has aborted the charging pro­
cess prematurely with an alarm. You can find a list of the alarm messages in
the section Alarm messages in the alarm history (Page 98).
Operation
8.7 Operating the Service menu
89