Product Description; Product Function (Connect Variants Only) - Rentokil RADAR X Manual

Table of Contents

Advertisement

Product Description

RADAR X is a stand alone, battery powered
trapping device that has been designed to
capture, dispatch and contain mice efficiently,
hygienically and humanely. It is designed
primarily for high risk customers, such as
food
processing
manufacturing and computer suites, where
there is zero pest tolerance or conventional
baiting is not allowed. However, the many
product features of RADAR X make it
suitable for a wide range of customers as it
can operate in a variety of environments.
Intruding mice are captured as soon as they
are detected, immediately reducing the risk
to the customer. They are then dispatched by
concentrated release of carbon dioxide (CO
into the tightly sealed trapping device. CO
capable of dispatching mice extremely rapidly
and is widely recognised as a humane method
of control. The mouse is unconscious within
15-20 seconds and fatal levels are reached
within 45 seconds of the trapping device's
activation.
RADAR X has been designed by Rentokil to
Product Functions
RADAR X signals the capture of a mouse
sending a message to the Connect Control
Panel and then server. A technician will
receive an alert and arrive promptly to empty,
clean, service and reset the trapping device.
Rigorous testing and quality controls have
been implemented at every stage of the
manufacturing process to ensure that RADAR
X is a high quality product that is capable of
supporting a high quality service proposition.
The Long Reach radio system ensures
reliable connectivity remotely to the control
panels. Beacon signals are emitted from the
control panels, so the RADAR X will connect
to the control panel with the best connection.
In an system with multiple control panels,
plants,
pharmaceutical
exploit the travelling habits of mice as opposed
to more traditional methods which target their
feeding behaviours, e.g. baiting. Correctly
installed trapping devices will typically be
placed at wall / floor junctions, relying on a
mouse's natural curiosity and tendency to run
against walls. RADAR X can be configured
to have a single chamber only.
configured as a single or as a dual, when the
mouse enters through the trap, it triggers the
device to immediately close the door, trapping
the mouse inside a tightly sealed chamber.
Simultaneously, a pressurised gas canister is
pierced and fills the relevant tray with carbon
dioxide.
)
2
is
The customer is provided with 24/7 pest
2
control and can be reassured that the product
is both effective and humane, reducing the
risk to their stock and premises.
It is recommended to replace batteries at 12
monthly intervals to maximise the installed
system performance.
(Connect Variants Only)
the RADAR X will select an alternative if the
connection to the initial one fails.
The loss of connection to the radio system
will cause sensors to retry the connection
and attempt to make a new one if it can. If
connection continues to be unsuccessful the
software automatically increases the time
between attempts to conserve battery life.
The maximum number of trapping devices
that can be connected to a control panel is
300 and so if more trapping devices are
required then an additional control panel will
be required.
7
Whether

Advertisement

Table of Contents
loading

Table of Contents