Table of Contents
Advertisement
Servicing & Maintenance
1. Status Check
Use the RI Key Magnet to activate the Interface
Tap 1
Eg: Error 5 (Trigger pin not
set) on right side of unit.
If pest triggered (Mouse),
"tr" is displayed a service is
required.
Eg: Left side triggered.
NOTE: The heart will display even if canister(s) are not loaded as there is no active
electrical check for their presence. Therefore it is up to the technician to ENSURE viable
CO2 canister(s) are loaded when commissioning/servicing.
First tap using the RI Magnet Key, will display the units
health. If not OK the Service Mode (Icon
and an error code will appear on the display indicating
a service is required. The appropriate Arrow Icon will
indicate which side the error is on.
If all OK Device Status
(Icon
) will be solid. A
service may not be required.
Unit will be capable of
trapping after 60 seconds.
16
Active
Magnet
Zone
) will flash
Error code meanings can be
found on the label on the
underside of the unit, or on
page 28 of this manual.
See Page 27 for more
Interface information.
Advertisement
Table of Contents
