Table of Contents
Advertisement
8. Closing the Catch Tray
9. Reactivate the Trap
Click
If all is OK the
Device Status (Icon
service is now complete.
Note: The unit will allow a SELF deploy as long as
one side is set correctly. i.e. it is possible to allow a
unit to SELF deploy even if one side is not functional.
NOTE: The heart will display even if canister(s) are
not loaded as there is no active electrical check for
their presence. Therefore it is up to the technician
to ENSURE viable CO2 canister(s) are loaded when
commissioning/servicing.
The signal strength will be shown for 2 min. After
which it will automatically exit Service Mode and
Deploy. Alternatively Tap the key to the Interface
to exit Service Mode immediately and Deploy.
20
Click
will be solid. The
)
Advertisement
Table of Contents
