Use Of The Product; Cleaning And Maintenance - Jimmy BX5 Pro User Manual

Use of the product

Function description
Insert the plug into the socket, press on/off
button, the machine is in strong mode and strong
indicator lights up.Press the mode button to
switch the soft mode and soft indicator lights
up.Press on/off button again, the machine stop
working.
Note:
1.When the dust over the Max line,please clean the dust
cup and MIF filter in time.
2.For safety reasons, the UV light only works when two
micro switches are pressed simultaneously. Otherwise,
the UV light will automatically turn off.
3.The product is equipped with UV light.Do not view the
bottom of the machine , shine on plants when the power
is turned on to prevent UV rays from causing harm to
human body or other objects.

Cleaning and maintenance

Note:
1. MIF filter is available for sale at JIMMY distributor.
2.It is recommended to clean the dust cup in time after
each use. When there is too much dust to cause MIF
blockage, it needs to be cleaned in time or replaced if
necessary.
Dust cup cleaning
1.Turn off the machine and unplug the power
cord. Then press the release button and lift
upward. (Figure 1)
2.Hold the dust cup and dust cup cover
separately , twist dust cup lid anticlockwise (Figure 2),lift up and remove it from dust cup
to clean .(Figure 3)
MIF filter and Cyclone Cleaning
Hold the cyclone in one hand, pinch the "UP" logo with the other hand, and take out filter
(Figure 4),Do Not tap the filter in reverse side in case of filter clog.(Figure5)
Clean the cyclone metal filter with the attached mini brush.(Figure 6)
After cleaning dust cup ,MIF filter and cyclone, assemble in reverse order. Rotate the dust cup
cover assembly into the dust cup.After hearing a "click" and the dot mark is aligned with the lock
position that is assembled in place.(Figure 7)
1
Dust cup lid assembly
Dust Cup
2
Up ribbon
MIF filter
4
Cyclone metal filter
Mini-brush
6
Release
button
Cyclone
3
Downward tap
Filter
5
Rotate dust cup lid
7
3