basic recording
REVIEWING AND SEARCHING A RECORDING
•
The Rec Search function works only in Camera mode. ➥page 18
•
Used to review previously recorded images or to fi nd a point to record a new image in the STBY mode.
Record Search (Joystick)
1. Set the Select switch to TAPE. (VP-D395i only)
2. Press the MODE button to set Camera (
3. To start recording, press the Recording start/stop button.
4. Set to STBY mode by pressing Recording start/stop button again.
5. To perform the backward search:
•
Move the Joystick ( ) to the left.
- While you press and hold the Joystick ( ), the selected images will be played
in reverse order. Press and release the Joystick ( ) to play the images in
reverse order for 3 seconds before resetting the play order to normal.
To perform the normal search:
•
Move the Joystick ( ) to the right.
- While you press and hold the Joystick ( ), the selected images will be
played in normal order. To resume recording when your record search
is done, press the Recording start/stop button.
•
Mosaic shaped distortion may appear on the screen while in Record
Search mode.
•
Pressing Recording start/stop button after rec search will overwrite
the images recorded after that point.
40_ English
All manuals and user guides at all-guides.com
).
0:00:00
0:00:00
SP
16:9 Wide
16:9 Wide
60min
60min
16Bit
16BIt