Using The Battery Pack - Samsung VP-D392 User Manual

preparation

USING THE BATTERY PACK

•
Use the IA-BP80WA battery pack only.
•
The battery pack may be charged a little at the time of purchase.
•
Be sure to charge the battery pack before you start using your miniDV camcorder.
Inserting / Ejecting the battery pack
1. Open the LCD screen as shown in the diagram.
2. Insert the battery pack into the battery pack slot until it softly clicks.
• Make sure that word mark (SAMSUNG) is facing out while
the camcorder is placed as shown in the diagram.
3. Slide the BATT. release switch and pull out the battery pack.
• Gently slide the BATT. release switch in the direction as
shown in the diagram.
• Additional battery packs are available at your local Samsung dealer.
• If the miniDV camcorder will not be in use for a while, remove the battery
pack from the miniDV camcorder.
Charging the Battery Pack
1. Slide the POWER switch downwards to turn off the power.
2. Insert the battery pack to the camcorder.
3. Open the jack cover and connect the AC power adaptor to the DC IN jack.
4. Connect the AC power adaptor to a wall socket.
5. Once charged, disconnect the AC power adaptor from the DC IN jack on your
camcorder.
• Even with the power switched off, the battery pack will still discharge if it is
left inserted in the camcorder.
It is recommended that you purchase one or more additional battery packs
to allow continuous use of your miniDV camcorder.
Use only Samsung-approved battery packs. Do not use batteries from other manufacturers.
Otherwise, there is a danger of overheating, fi re or explosion.
Samsung is not responsible for problems occured due to using unapproved batteries.
14_ English
All manuals and user guides at all-guides.com
Insert
Eject
BATT.