APPLYING VISUAL EFFECTS (VISUAL EFFECT)
•
The visual effect function works only in Camera mode. ➥page 18
•
The visual effects enable you to give a creative look to your recording.
•
Select the appropriate visual effect for the type of picture that you wish to record
and the effect you wish to create. There are 10 visual effect modes.
1. Set the Select switch to TAPE. (VP-D395i only)
2. press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select "Camera", then press the
Joystick or move the Joystick ( ) to the right.
5. Move the Joystick (▲ / ▼) up or down to select "Visual Effect", then press
the Joystick.
•
The available options are listed.
6. Move the Joystick (▲ / ▼) up or down to select the desired visual effect option,
then press the Joystick.
•
The display mode is set to the selected mode.
7. To exit, press the MENU button.
All manuals and user guides at all-guides.com
).
MODE
CARD
TAPE
(VP-D395i only)
BATT .
Camera Mode
Camera
Camer
Off
Program AE
✔
Art
White Balance
Visual Effect
Mosaic
Sepia
16:9 Wide
Macro
Negative
DIS
Mirror
Mov
Move
Sele lect
MENU
Exi
Exit
0:00:30
0:00:30
STBY
STBY
SP
60min
60min
10Sec
10Sec
Art t
Ar
16Bit
16BIt
S
C.Nite 1/30
C.Nite 1/30
English _51