MAKING YOUR FIRST RECORDING
1. Connect a power source to the camcorder.
(A battery pack or a AC power adapter)
•
Insert a cassette. ➥page 34
•
If you want to record on a memory card, insert the
memory card. (VP-D395i only) ➥page 74
2. Remove the lens cover.
3. Slide the POWER switch downwards to turn on the
power.
•
Open the LCD screen.
•
Set the Select switch to CARD or TAPE.
(VP-D395i only)
•
Press the MODE button to set Camera (
- Make sure that STBY is displayed.
•
If the write protection tab of the cassette is open
(set to save), STOP and "Protection!" will be
displayed. Release the write protection tab to
record.
•
Make sure the image you want to record appears on the LCD screen.
•
Make sure the battery level indicates that there is enough
remaining power for your expected recording time.
•
You can select a record mode of your choice. ➥page 44
4. To start recording, press the Recording start/stop button.
•
"REC●" is displayed on the LCD screen.
To stop recording, press the Recording start/stop button again.
•
"STBY" is displayed on the LCD screen.
•
Eject the battery pack when you fi nish the recordings to prevent unnecessary battery power consumption.
•
The miniDV camcorder provides two Recording start/stop buttons. One is on the rear side of the
camcorder and the other one is on the LCD panel. Select the Recording start/stop button according to
the use.
All manuals and user guides at all-guides.com
➥
page 17
➥
pages 14,17
).
OP EN
OP EN
SP
0:00:00
0:00:00
REC
REC
60min
60min
16:9 Wide
16:9 Wide
10Sec
10Sec
16Bit
16Bit
S
No Tape !
No Tape !
1/50
1/50
M
29
29
W
T
English _35