Initial Setting: System Menu Setting; Setting The Clock (Clock Set); 初始设置:系统菜单设置; 设置时钟（时钟设置 - Samsung VP-DC161Wi Owner's Instruction Manual

ENGLISH

Initial Setting: System Menu Setting

Setting the Clock (Clock Set)

 Clock setup works in Camera Mode/Player Mode/M.Cam Mode/
M.Player Mode. page 26
 The date/time is automatically recorded onto a disc.
Before recording, please set the date/time.
1. Set the [Mode] switch to [DISC] or [CARD].
(VP-DC163(i)/DC165W(i)/DC165WB(i) only)
2. Set the [Power] switch to [
[ (Player)].
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select
<System>, then press the [Joystick(OK)].
5. Move the [Joystick] up or down to select
<Clock Set>, then press the [Joystick(OK)].
 The day will be highlight first.
6. Move the [Joystick] up or down to set current
day, then press the [Joystick(OK)].
 The month will be highlighted.
 To adjust the clock, select the Year,
Month, Day, Hour, or Min by pressing the
[Joystick(OK)], then move the [Joystick]
up or down to set respective values.
7. You can set the month, year, hour, and minute
following the same procedure after setting the day.
8. Press the [Joystick(OK)] after setting minute.
 A message <Complete!> is displayed.
9. To exit, press the [MENU] button.
Notes
After the Lithium Battery loses its charge (after

about 6 months), the date/time appears on the
screen as 12:00 01.JAN.2006.
You can set the year up to 2040.

If the Lithium Battery is not installed, data

inputted will not be backed up.
30
4
Camera Mode
(Camera)] or
►System
Clock Set
Remote
Beep Sound
Language
Demonstration
5
Camera Mode
►System
Clock Set
Remote
Beep Sound
Language
Demonstration
8
Camera Mode
►System
Clock Set
Remote
Beep Sound
Language
Demonstration
初始设置:系统菜单设置
设置时钟（时钟设置）
 可进入摄像模式/放像模式/照片摄制模式/照片播放模式进行时钟设
置。26页
 设置将会被记录在光盘上。在拍摄之前请先记录日期/时间。
1. 拨动模式[Mode]开关到光盘[DISC]或卡[CARD]。
2. 调整电源[Power]开关到[
►On
3. 按住[MENU]按键。
►On
►English
4. 转动[Joystick]上或者下选择<System>
►On
5. 上下移动[Joystick]选择<Clock Set>
Move OK Select MENU Exit
6. 上下移动[Joystick]设置当前日期，然后按
01 JAN 2006
12 : 00
7. 在设置日期之后，您可以按照同样的步骤设置
OK MENU
Adjust Select Exit
8. 在设置分钟之后，按[Joystick(OK)]。
9. 如退出请按下[MENU]按键。
注意
01 JAN 2006
 超过使用期限的锂电池使用（使用寿命为6个
12 : 00
Complete!
 您能调整的年份可以向上到2040。
Move OK Select MENU Exit
 如果您的锂电池设置错误或者电量不足，那您
(仅限VP-DC163(i)/DC165W(i)/DC165WB(i))
(Camera)]或者
[ (Player)]。
 菜单目录如表格示。
(系统)，然后按下[Joystick(OK)]。
(时钟设置)，然后按[Joystick(OK)]。
 日期将首先高亮显示。
[Joystick(OK)]。
 月份将高亮显示。
 要调整时钟，按[Joystick(OK)]，然后上下
移动[Joystick]设置相应的值，通过这种方
法选择年份、月份、日期、小时或分钟。
月份、年份、小时和分钟。
 显示消息<Complete!> (完成!)。
月），显示屏就会有这样的时间显示出来
12:00 01.JAN.2006。
设置时间将不能被保留。
中 文