GE Multilin GEK-113000T User Manual page 135

5.1 INTRODUCTION 5 BOOTCODE AND FIRMWARE UPGRADE
Figure 5–3: TCP/IP PROPERTIES
In the IP address tab, select Advanced... (see Figure 5–3:) and add a new address in the PC that corresponds to the
same LAN pattern that the relay has (in the example bellow 192.168.37.54).
5
Figure 5–4: IP ADDRESS FOR COMPUTER
Windows allows Multihosting, so it permits having as many IP addresses as desired. It is necessary to turn off and on the
computer to activate the new address that has been assigned to the PC.
5-4 F650 Digital Bay Controller GEK-113000T