Table of Contents
Advertisement
10.14
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
Info
Never adjust the air pressure to a value outside the
stated range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the
hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Turn adjusting screw
Info
Adjusting screw
right fork leg.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
V01523-10
Compression damping (125/150 SX EU)
Comfort
Standard
Sport
Compression damping (125/150 SX US)
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
TUNING THE CHASSIS 10
p. 45)
1
clockwise all the way.
1
is located at the upper end of the
17 clicks
12 clicks
7 clicks
17 clicks
12 clicks
7 clicks
41
Advertisement
Table of Contents
