Preparing The Vehicle For Riding On Dry Sand - KTM 125 SX 2020 Owner's Manual

» If humidity, corrosion, or damage is found:
–
Clean and dry the connector, or change it if necessary.
–
Make sure that no radiator covers are installed.
Difficult operating conditions are:
–
Rides on dry sand. (
–
Rides on wet sand. (
–
Rides on wet and muddy circuits. (
–
Rides at high temperatures and slow speed. (
–
Riding at low temperatures and in snow. (
7.4

Preparing the vehicle for riding on dry sand

p. 21)
p. 22)
p. 24)
p. 24)
p. 25)
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint
value:
M01129-01
–
Change the radiator cap.
–
Mount the air filter dust cover.
Air filter dust cover (79006920000)
Info
Observe the fitting instructions for KTM PowerParts.
M01104-01
PREPARING FOR USE 7
1.8 bar (26 psi)
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
–
Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
21