Cleaning The Spa Interior; Pillow Care; Maintaining The Synthetic Cabinet; Cleaning The Control Panel - Jacuzzi J-485 Owner's Manual

13.3

Cleaning the Spa Interior

To preserve the sheen of your spa's surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Jacuzzi dealer. We recommend using
Jacuzzi's Spa All Purpose Cleaner to clean the spa's interior surface.
Use extreme care to assure that no soap residue is left on the surface.
This could cause severe sudsing when the spa is refilled. Jacuzzi
chemicals are for use in the U.S. only.
13.4

Pillow Care

Clean the headrests in your spa as needed by wiping
them with a cloth with soapy water. It is not necessary to
remove the headrests for cleaning. To remove headrests
for long term storage or replacement, grasp both ends
of each headrest and gently pull inward towards the
center of the spa. To reinstall, align the pillow slot over
the mounting tab and press until the pillow snaps into place.
13.5

Maintaining the Synthetic Cabinet

The synthetic cabinet requires little or no maintenance of any kind. To clean,
simply wipe cabinet with mild detergent soap solution and a clean towel.
CAUTION: Never spray cabinet with a high pressure garden
hose for any reason since this action may induce an electrical
short in the spa's electrical equipment.
13.6

Cleaning the Control Panel

To clean, simply wipe control panel with a micro-fiber cloth that is used
for cleaning polycarbonate lenses.
13.7

Cover Care and Maintenance

Certain hot tub covers distributed by Jacuzzi® Hot Tubs have a vinyl or
PROLAST™/PROLAST™ Extreme encasement. This vinyl or PROLAST/
PROLAST Extreme encasement also referred to as the cover "skin" is
attractive and durable. Regular monthly cleaning and conditioning (vinyl)
is strongly recommended and may increase the longevity of your cover.
Jacuzzi chemicals are for use in the U.S. only.
A. To clean and condition the encasement (cover skin):
1. Use a garden hose to remove any debris.
2. Using a large sponge or soft bristle brush, use diluted or mild soap to
gently scrub the top.
3. Rinse and clean and do not allow soap to dry on the cover. Do not
use soap on the underside of the cover.
4. Please check with your Jacuzzi Hot Tub Dealer for recommended
cover care and conditioning products. Use non-petroleum based
conditioners to keep the vinyl supple.
5. Do not use any solvents, abrasive cleaners or strong detergents. Do
not use products that contain silicone or alcohol.
J-400
65