Cleaning The Spa Interior - Jacuzzi J-315 Owner's Manual

CAUTION: There are certain precautions to keep in mind
when draining your spa. If it is extremely cold and the spa is
outdoors, freezing could occur in the lines or the equipment
(see "WINTERIZING", page 32). On the other hand, if it is hot
outdoors, do not leave the spa's surface exposed to direct
sunlight.
To drain your spa, perform the following steps:
1. Turn off power to spa at breaker.
2. Locate the drain valve on the front/lower
plastic pan. Hold the larger (rear) body
to prevent it from turning, then loosen
and remove the front cap to expose the
underlying male hose threads.
3. Attach a garden hose to the exposed
threads.
4. Gently rotate the larger (rear) valve
body 1/3 turn counterclockwise to
unlock the drain valve.
5. Pull the larger (rear) body outward to
open drain.
6. After the spa drains, perform steps 2-5
in reverse order to close the drain prior
to refilling the spa.
After refilling, turn on power to the spa and follow the steps listed
under "Spa Fill Up Procedure" (page 14). Always fill your spa
through both filter wall fittings.

11.3 Cleaning The Spa Interior

To preserve the sheen of your spa's surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Jacuzzi dealer. Regardless of the
cleanser used, use extreme care to assure that no soap residue is left
on the surface. This could cause severe sudsing when the spa is refilled.
Page 30
1. Turn off power to spa.
2.
3.
4.
5.
Open Drain
Unlock
Drain